OPEXSTUDIO
Critical 8 / Hazard guide

Lockout tagout

Part of workstream 02. ← Return to the Critical 8 overview

A production line has separate energy sources, with an emergency stop contrasted against personal isolation and verified restraint of gravity energy.
Verify the whole energy boundary

A stop button is not isolation. Identify connected systems, personal control requirements, stored energy and the evidence of the required safe state. AI-generated conceptual illustration; not a verified installation or equipment-specific instruction.

View full-size visual ↗

Understand the complete energy system and preserve personal protection. A stopped machine is not automatically an isolated machine.

01 / Put the idea to work

Understand the exposure

Identify the actual asset, connected loading and unloading equipment, utilities, stored energy and possible movement. Include gravity, pressure and energy that can return or accumulate. An emergency stop, software command or guard interlock has a different function from the required isolation. Their presence does not establish a safe state for access or servicing.

02 / Put the idea to work

Design and establish protection

Use the approved asset-specific method with competent authorized people. The method must define the protection of affected individuals, system boundaries, stored-energy response, verification and continuity during group work or shift changes. This lesson does not supply an isolation sequence or authorize someone to operate an unfamiliar device.

03 / Put the idea to work

Verify before and during work

The control owner translates these teaching prompts into asset-specific performance requirements and a safe checking method. Record the actual evidence, its scope and the responsible role. Missing evidence remains Unknown; a required control that fails or cannot be verified creates a STOP condition for dependent exposure.

  • Current method covers the actual asset and all connected energy.
  • Required personal or group protection is established and maintained.
  • Verification and handover evidence meet the approved method.
04 / Put the idea to work

Practise a decision

A press has stopped mid-cycle. A worker proposes reaching inside because the emergency stop is pressed. What remains unknown?

Feedback: The stop command does not prove control of every energy source or stored movement. Prevent access and obtain the authorized isolation response for that asset. Establish the complete boundary and accepted safe-state evidence before dependent work.

Changed condition: The supply is locked, but a raised fixture can descend. Maintain the restriction while the competent owner resolves the gravity hazard through the approved method. One isolated energy source does not prove the whole system is protected.

05 / Put the idea to work

Support the people doing the work

Familiarity can hide an added supply or a changed fixture. The pre-job brief should test understanding of boundaries and critical steps. After interruption, recover the verified work state; do not infer it from a colleague’s informal assurance.

06 / Put the idea to work

Transfer the learning

Choose one relevant task and explain the hazard, protective function, evidence needed and condition that would stop the work. Then identify who can resolve a gap and what must be rebriefed before designated restart. Use an approved classroom or tabletop example; do not create a hazardous condition for assessment.

This topic is educational guidance, not an approved equipment procedure or a competence certificate. C8-02 is the stable program identifier. Local technical acceptance, emergency capability and understood instructions remain prerequisites for actual work.

Learning material for team discussion. Apply your site’s approved procedures, competent-person assessments and applicable requirements to actual work.

Prepare the team conversation

Take this learning to the team

Choose the language and format for your session. Review drafts with your safety and operations leads before adapting them to local work. A download is learning material, not authorization to perform a hazardous task.

English resources

Browse all resources and language editions →

Check the original source

Sources & further reading

Use the original source to check its scope, terminology and current requirements.

← Back to all OPEX training